Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Miami?
Gate parts and welding in Miami typically cost between $95 and $1,800 depending on the component. A welded hinge replacement on a standard residential swing gate usually runs $180 to $340, while custom welding on a wrought iron driveway gate averages $450 to $900. Most jobs include the part, the labor, and cleanup, and we give you the written price before any work starts.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Miami homeowners paid across our gate repair jobs over the past year. Prices reflect parts plus labor, and every line below is a real range from that work. Your exact number depends on your gate’s size, material, and condition – but this table gives you solid ground to stand on before you call anyone.
| Service | Typical Cost Range |
|---|---|
| Welded hinge replacement (per hinge) | $95 – $185 |
| Weld repair on sagging gate frame | $180 – $340 |
| Custom wrought iron picket replacement | $120 – $260 per picket |
| Gate wheel or roller replacement | $85 – $175 |
| Latch and lock assembly replacement | $110 – $240 |
| Custom bracket fabrication and weld | $150 – $300 per bracket |
| Gate motor bracket re-weld | $130 – $260 |
| Track section repair (sliding gates) | $190 – $420 |
| Full swing gate re-hang and weld alignment | $350 – $700 |
| Wrought iron driveway gate restoration (weld + paint prep) | $450 – $900 |
| Emergency weld repair (same day, Miami metro) | $220 – $480 |
What makes the final number move? Three things mostly. Gate material is the big one – solid steel takes longer to weld cleanly than thin-walled aluminum tubing. Gate size matters too: a 6-foot walk gate needs less work than a 16-foot driveway gate with a cantilever track. And location on your property changes everything. Gates set into a coral rock wall or an older stucco pillar in neighborhoods like Shenandoah or Coral Way often need extra anchor work, which adds time.
We don’t play games with “from” pricing. You get a written quote before any torch is lit, and that’s the number you pay. Call (850) 495-7564 and we’ll talk through what your gate actually needs.
What Affects Gate Parts & Welding Pricing in Miami
- Salt air and corrosion. Miami’s coastal humidity accelerates rust on iron and steel gates, especially east of I-95 in neighborhoods like Brickell, Edgewater, and Morningside. Heavily corroded metal takes longer to prep before welding, which adds labor.
- Gate material and thickness. Hollow aluminum gates are lighter and cheaper to fabricate than solid wrought iron or heavy steel. Thicker gauge steel requires hotter welds and more passes.
- Gate type: swing vs. sliding. Sliding gates in Miami tend to run on wheels along a track, and track repair plus wheel replacement is a common combo job. Cantilever sliding gates – the kind that float over the driveway with no track on the pavement – often need custom bracket fabrication.
- Access to the weld site. If your gate post is boxed in by hedges, a privacy fence, or a concrete driveway that blocks our truck access, setup takes longer. Some Coconut Grove and Coral Gables properties have very tight side-yard access, and that’s fine – it just changes labor time.
- Age of the gate and existing welds. Older Miami gates, especially those installed before Hurricane Andrew-era code changes, often have multiple previous patch welds. Re-welding over old joints is more involved than a clean break repair.
- Permit and code considerations. Miami-Dade County requires gates that are part of a pool barrier to be self-closing and self-latching. If your weld job involves those safety features, the parts and alignment work need to meet that standard. We know the requirement and build it into the price.
How to Save on Gate Parts & Welding
The best way to keep a gate welding job affordable is to catch small problems before they become structural. A hinge that squeaks and sticks costs $95 to $185 to replace. A hinge that’s been ignored long enough to crack the gate frame means a $450 re-hang instead. If you’re in a neighborhood with heavy rain exposure – think Westchester, Fontainebleau, or Kendall – inspect your gate hardware at the start of hurricane season every year.
Also, don’t let paint hide the problem. Many Miami gate jobs start because rust has been painted over repeatedly, and by the time the weld fails, the metal underneath is thinner and harder to repair cleanly. Bare-metal repair before repainting is the fix that lasts.
And be honest about the gate’s future. If the gate is 25 years old, rusted through in three places, and the opener is original, replacing a few pickets may not make financial sense. We’ll tell you straight whether repair or replacement serves you better – that’s part of the written price conversation, not an upsell. Estimates are free, and you can reach us at (850) 495-7564.
How Warden Gate Repair Prices a Welding Job in Miami
We follow a set order on every gate welding and parts job, and it’s the same process whether the gate is a walk-in in Palmetto Bay or a commercial property gate in Doral.
- You describe the problem. When you call, a real person answers – 24/7. You’ll tell us what’s happening: gate dragging, hinge separated, wheel off the track, or a visible crack in a weld. No chatbots, no phone trees.
- We give you an honest price range before we arrive. Based on the gate type, material, and the repair description, we share a realistic range. Not a bait price.
- We confirm the name and photo of your technician. Before the tech heads your way, you receive their name and photo. That’s the Threshold Standard – every technician is background-checked, identity-verified, and photo-badged. They show that badge at your door.
- The tech inspects and gives the written price. On site, we confirm exactly what’s needed. You receive the written price before any work starts. No surprise line items at the end of the job.
- We weld, replace, and test. The work gets done, the gate gets cycled multiple times, and the weld site gets cleaned. We don’t leave grinding dust on your driveway.
- You get the 365-Day Done Right Promise in writing. If the repair fails within a year, our return visit is free. We make it right. That promise is written into every job we do.
We service gate equipment and hardware from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate motor bracket needs a re-weld and it’s one of those brands, we know the mounting points and tolerances without guessing.
Cole Rafferty leads our Miami team and has been inspecting gates across the city since 2008. He’s trained the crew to treat every gate like it’s protecting a family they know. Because in this city, that’s exactly what a gate does.
Weld Repair vs. Gate Replacement: Which Makes Sense?
A weld repair on a gate frame in Miami usually costs $180 to $340. Replacing an entire wrought iron driveway gate typically runs $1,800 to $4,500 installed, depending on size and design. So the math usually favors repair – unless the gate is failing in multiple places.
Here’s the honest test we apply. If the gate has one or two broken welds and the surrounding metal is still solid, welding is the right call and will likely last for years. If the gate has rust-through holes, multiple patched welds from previous repairs, or a frame that’s been bent by a vehicle impact, replacement may be cheaper over a five-year timeline because you’ll stop paying for recurring weld fixes. We’ll show you both numbers and let you decide. No pressure, no countdown, no “today only” pitch. Just straight math.
Same-Day Gate Welding in Miami: When You Can’t Wait
A gate stuck open in Doral or a swinging gate that got backed into in Kendall isn’t just an annoyance – it’s a security hole. We know Miami homeowners want that gate closed tonight, and we keep capacity for same-day weld and parts repair across the metro.
Same-day welding work in Miami typically costs $220 to $480, depending on the repair’s complexity and how deep into the evening the job goes. The factors are straightforward: heavier gate, more weld points, more time. We quote it the same way we quote everything – in writing, before work begins.
Our phone line is answered by a live person 24/7 because we know gate failures don’t respect business hours. A broken weld at 9:30 on a Sunday night is exactly when you want to hear a human voice say “we can have someone there.” Call (850) 495-7564 any time.
A Note on Welding Safety
Welding is a skilled trade that involves high heat, electrical current, and rapidly melting metal. Welding fumes contain metal particulates, and hot slag can travel several feet. This is not a do-it-yourself repair. A bad weld on a gate hinge is a safety hazard – the gate can fail catastrophically while someone is walking through it. If you’re considering a mobile welder for your gate, verify their experience with gates specifically, not just general welding. Gate frabrication and repair is its own specialty, and an improper weld on a heavy swing gate can fail without warning. We recommend using a trained professional for any structural weld on a moving or load-bearing gate. Our technicians are factory trained on gate hardware and welding procedures for every brand we service.
FAQs – Gate Parts & Welding Cost in Miami
How much does it cost to weld a broken gate hinge in Miami?
Welded hinge replacement in Miami typically costs $95 to $185 per hinge. That includes removal of the old hinge, surface prep, welding the new hinge in place, and testing the gate swing. If the gate frame itself is cracked near the hinge, expect $180 to $340 total. Call (850) 495-7564 for an exact quote – estimates are free.
Can you weld a wrought iron gate the same day?
Yes. Same-day weld repair is available across the Miami metro and typically costs $220 to $480. The range depends on how many weld points need work and how late in the day the service runs. We keep same-day capacity specifically for gates that won’t close, because an unsecured gate is not something you should live with overnight.
Is it cheaper to repair or replace a rusted driveway gate?
If the frame is sound and there are one or two failed welds, repair is far cheaper: $180 to $340 versus $1,800 to $4,500 for replacement. If the rust has compromised the metal throughout, we’ll tell you directly that replacement makes better long-term financial sense. We’ll show you both numbers and you choose.
How much does a gate wheel or roller replacement cost in Miami?
Gate wheel and roller replacement runs $85 to $175 per wheel, including the part and labor. Sliding gates in Miami often need two wheels replaced together, and if the track is worn, track section repair adds $190 to $420. We’ll give you the written price on site before any work starts.
Do you weld gate motor brackets for LiftMaster and FAAC openers?
We do. We’re factory trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. A gate motor bracket re-weld typically costs $130 to $260 in Miami, and we set the bracket so the motor operates without binding on the gate arm.
Does Warden Gate Repair give free estimates for welding work?
Yes. Every Miami gate welding and parts job starts with a free estimate. You get a name, a photo of your technician, and a written price before the work begins. If we find the repair is smaller than the original description, the price goes down – not up. Call us at (850) 495-7564.
Why Miami Homeowners Call Warden Gate Repair for Welding
A warden is someone trusted to watch over a place and keep it secure. That’s the idea behind this company, and it’s how we run every gate job in Miami. When you book with us, you know your technician’s name before they arrive. You see their photo. You get a written price before any work starts. And if the repair isn’t right within 365 days, we return free to make it right. Cole Rafferty has led this team since 2008, and we’ve spent those years learning the specific ways Miami’s salt air, storms, and heat stress gate hardware.
For a full look at what we do, visit our Gate Parts & Welding in Miami service page. Or start from home to see everything we cover. When you’re ready for a written price and a tech you’ll recognize at the door, call (850) 495-7564.
Pricing reflects the Miami market as of 2026. Warden Gate Repair Miami offers free estimates – call (850) 495-7564.
Written by Cole Rafferty, Owner at Warden Gate Repair, serving Miami since 2008.
What Our Customers Say
"Keypad at the entrance died. They replaced it and reset all the codes for the neighbors. Took about an hour."
- Gilbert S."Slide gate stopped halfway and the motor just hummed. Tech showed his ID, tested the limit switch and found a worn roller wheel. Replaced both and the gate glides again."
- Curtis B."Good repair on our gate operator board. Waited a couple days for the board to arrive, but he checked in. Works perfectly now."
- Monica P.